And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.206
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.615
And
I accept adding "cowsay" to Additional Software
4.875
And
Additional Software is correctly configured for package "cowsay"
0.615
And
I shutdown Tails and wait for the computer to power off
4.165
And
I start Tails from USB drive "__internal" with network unplugged
33.951
And
I enable persistence
11.980
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
7.364
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.535
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.029
And
available upgrades have been checked
1.093
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.391
And
I can open the Additional Software configuration window from the notification
2.680
And
I shutdown Tails and wait for the computer to power off
17.862
And
I start Tails from USB drive "__internal" with network unplugged
33.534
And
I enable persistence
11.842
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.968
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058