And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.008
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.441
And
I accept adding "cowsay" to Additional Software
4.857
And
Additional Software is correctly configured for package "cowsay"
0.726
And
I shutdown Tails and wait for the computer to power off
4.366
And
I start Tails from USB drive "__internal" with network unplugged
35.097
And
I enable persistence
12.854
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.037
And
I log in to a new session
7.902
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.164
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.024
And
available upgrades have been checked
1.084
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.893
And
I can open the Additional Software configuration window from the notification
2.480
And
I shutdown Tails and wait for the computer to power off
18.199
And
I start Tails from USB drive "__internal" with network unplugged
36.442
And
I enable persistence
13.067
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.414
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.039
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.046