And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.187
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.453
And
I accept adding "cowsay" to Additional Software
2.481
And
Additional Software is correctly configured for package "cowsay"
0.542
And
I shutdown Tails and wait for the computer to power off
4.093
And
I start Tails from USB drive "__internal" with network unplugged
33.494
And
I enable persistence
11.165
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
7.718
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.177
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.029
And
available upgrades have been checked
0.034
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.283
And
I can open the Additional Software configuration window from the notification
2.643
And
I shutdown Tails and wait for the computer to power off
17.687
And
I start Tails from USB drive "__internal" with network unplugged
33.520
And
I enable persistence
11.572
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.701
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.142
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.060
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.048