And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.813
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.060
And
I accept adding "cowsay" to Additional Software
4.955
And
Additional Software is correctly configured for package "cowsay"
0.687
And
I shutdown Tails and wait for the computer to power off
3.969
And
I start Tails from USB drive "__internal" with network unplugged
33.676
And
I enable persistence
11.117
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
7.694
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.205
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.029
And
available upgrades have been checked
1.082
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.969
And
I can open the Additional Software configuration window from the notification
2.435
And
I shutdown Tails and wait for the computer to power off
17.780
And
I start Tails from USB drive "__internal" with network unplugged
33.446
And
I enable persistence
11.255
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.195
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.177
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.046
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054