And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.141
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.664
And
I accept adding "cowsay" to Additional Software
5.240
And
Additional Software is correctly configured for package "cowsay"
0.603
And
I shutdown Tails and wait for the computer to power off
5.582
And
I start Tails from USB drive "__internal" with network unplugged
37.130
And
I enable persistence
12.499
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.041
And
I log in to a new session
7.800
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.257
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.027
And
available upgrades have been checked
1.094
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.899
And
I can open the Additional Software configuration window from the notification
2.457
And
I shutdown Tails and wait for the computer to power off
14.492
And
I start Tails from USB drive "__internal" with network unplugged
35.277
And
I enable persistence
13.347
And
I configure APT to prefer an old version of cowsay
0.008
And
I log in to a new session
7.809
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.172
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063