And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.465
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.152
And
I accept adding "cowsay" to Additional Software
3.987
And
Additional Software is correctly configured for package "cowsay"
0.448
And
I shutdown Tails and wait for the computer to power off
2.520
And
I start Tails from USB drive "__internal" with network unplugged
32.396
And
I enable persistence
10.151
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.045
And
I log in to a new session
7.774
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.149
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.033
And
available upgrades have been checked
1.102
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.789
And
I can open the Additional Software configuration window from the notification
2.575
And
I shutdown Tails and wait for the computer to power off
13.899
And
I start Tails from USB drive "__internal" with network unplugged
31.998
And
I enable persistence
10.858
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.946
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.141
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.049