And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.155
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.611
And
I accept adding "cowsay" to Additional Software
4.136
And
Additional Software is correctly configured for package "cowsay"
0.471
And
I shutdown Tails and wait for the computer to power off
2.497
And
I start Tails from USB drive "__internal" with network unplugged
31.409
And
I enable persistence
10.704
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.037
And
I log in to a new session
7.737
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.160
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.033
And
available upgrades have been checked
2.126
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.480
And
I can open the Additional Software configuration window from the notification
2.639
And
I shutdown Tails and wait for the computer to power off
12.392
And
I start Tails from USB drive "__internal" with network unplugged
32.450
And
I enable persistence
10.616
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.950
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.175
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.046