And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.013
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.269
And
I accept adding "cowsay" to Additional Software
4.056
And
Additional Software is correctly configured for package "cowsay"
0.495
And
I shutdown Tails and wait for the computer to power off
4.094
And
I start Tails from USB drive "__internal" with network unplugged
32.325
And
I enable persistence
10.316
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.042
And
I log in to a new session
6.962
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.151
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.030
And
available upgrades have been checked
0.049
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.769
And
I can open the Additional Software configuration window from the notification
2.417
And
I shutdown Tails and wait for the computer to power off
13.929
And
I start Tails from USB drive "__internal" with network unplugged
31.979
And
I enable persistence
10.481
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.261
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.147
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.043
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.049