And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.804
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
7.294
And
I accept adding "cowsay" to Additional Software
5.008
And
Additional Software is correctly configured for package "cowsay"
0.596
And
I shutdown Tails and wait for the computer to power off
4.122
And
I start Tails from USB drive "__internal" with network unplugged
33.161
And
I enable persistence
14.596
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
7.129
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.192
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.026
And
available upgrades have been checked
1.103
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.831
And
I can open the Additional Software configuration window from the notification
2.384
And
I shutdown Tails and wait for the computer to power off
18.098
And
I start Tails from USB drive "__internal" with network unplugged
33.611
And
I enable persistence
10.957
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
7.093
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.152
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.027
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.039
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067