And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.171
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.666
And
I accept adding "cowsay" to Additional Software
5.244
And
Additional Software is correctly configured for package "cowsay"
0.506
And
I shutdown Tails and wait for the computer to power off
3.936
And
I start Tails from USB drive "__internal" with network unplugged
35.393
And
I enable persistence
12.739
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
9.379
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.149
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.026
And
I prepare the Additional Software upgrade process to fail
0.034
And
the network is plugged
0.026
And
available upgrades have been checked
0.062
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.611
And
I can open the Additional Software configuration window from the notification
2.865
And
I shutdown Tails and wait for the computer to power off
12.949
And
I start Tails from USB drive "__internal" with network unplugged
34.447
And
I enable persistence
12.498
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.470
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.177
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.041
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.046