And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.383
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.673
And
I accept adding "cowsay" to Additional Software
4.989
And
Additional Software is correctly configured for package "cowsay"
0.498
And
I shutdown Tails and wait for the computer to power off
2.717
And
I start Tails from USB drive "__internal" with network unplugged
33.285
And
I enable persistence
11.736
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
7.884
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.045
And
available upgrades have been checked
2.199
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.759
And
I can open the Additional Software configuration window from the notification
2.393
And
I shutdown Tails and wait for the computer to power off
19.071
And
I start Tails from USB drive "__internal" with network unplugged
32.856
And
I enable persistence
11.548
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.931
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.287
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052