And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.144
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.857
And
I accept adding "cowsay" to Additional Software
5.349
And
Additional Software is correctly configured for package "cowsay"
0.562
And
I shutdown Tails and wait for the computer to power off
4.014
And
I start Tails from USB drive "__internal" with network unplugged
32.507
And
I enable persistence
11.628
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
7.874
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.212
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.040
And
available upgrades have been checked
0.046
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.133
And
I can open the Additional Software configuration window from the notification
2.629
And
I shutdown Tails and wait for the computer to power off
14.186
And
I start Tails from USB drive "__internal" with network unplugged
34.010
And
I enable persistence
11.840
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.627
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.132
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.044
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.046