Cucumber Reports (no 4845) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4845	16 May 2024, 17:35

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:25.636	Passed

Tags: @product @not_release_blocker

26.372

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.129

And I temporarily create a 4 GiB disk named "gptfat" 0.045

And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.335

And I plug USB drive "gptfat" 2.502

When I start Tails Installer 9.301

Then I am told by Tails Installer that the destination device "is too small" 0.056

Hooks

After features/support/hooks.rb:305 0.720

After features/support/hooks.rb:89 0.001

Tags: @product

20.687

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.222

And I temporarily create a 7200 MiB disk named "temp" 0.111

And I start Tails Installer 9.341

But a suitable USB device is not found 0.022

When I plug USB drive "temp" 2.677

Then the "temp" USB drive is selected 0.084

When I unplug USB drive "temp" 0.182

Then a suitable USB device is not found 0.046

Hooks

After features/support/hooks.rb:305 0.768

After features/support/hooks.rb:89 0.000

Tags: @product

3:49.440

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.935

And I temporarily create a 7200 MiB disk named "install" 0.039

And I create a gpt partition with a vfat filesystem on disk "install" 6.511

And I plug USB drive "install" 2.505

And I install Tails to USB drive "install" by cloning 3:16.148

Then the running Tails is installed on USB drive "install" 16.229

But there is no persistence partition on USB drive "install" 0.069

Hooks

After features/support/hooks.rb:305 1.424

After features/support/hooks.rb:89 0.119

Tags: @product

3:41.953

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.588

And I temporarily create a 7200 MiB disk named "install" 0.047

And I plug USB drive "install" 2.731

And I install Tails to USB drive "install" by cloning 3:18.584

Then the running Tails is installed on USB drive "install" 11.941

But there is no persistence partition on USB drive "install" 0.059

Hooks

After features/support/hooks.rb:305 1.528

After features/support/hooks.rb:89 0.115

Tags: @product

4:28.973

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.430

And I create a file in the Persistent directory 0.111

And I temporarily create a 7200 MiB disk named "install" 0.057

And I create a gpt partition with a vfat filesystem on disk "install" 6.386

And I plug USB drive "install" 2.507

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:48.722

Then the running Tails is installed on USB drive "install" 15.067

And there is a persistence partition on USB drive "install" 0.063

And the USB drive "install" contains the same files as my persistent storage 4.624

Hooks

After features/support/hooks.rb:305 1.838

After features/support/hooks.rb:89 0.123

Tags: @product

3:47.428

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.506

And I temporarily create a 7200 MiB disk named "install" 0.049

And I plug USB drive "install" 2.561

And I install Tails to USB drive "install" by cloning 3:17.217

Then the running Tails is installed on USB drive "install" 17.023

And there is no persistence partition on USB drive "install" 0.069

Hooks

After features/support/hooks.rb:305 1.673

After features/support/hooks.rb:89 0.095

Tags: @product

3:51.573

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.870

And I have started Tails from DVD without network and logged in 8.735

And I clone USB drive "__internal" to a temporary USB drive "install" 1.275

And I plug USB drive "install" 2.544

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:15.404

Then the running Tails is installed on USB drive "install" 13.664

And there is no persistence partition on USB drive "install" 0.079

Hooks

After features/support/hooks.rb:305 1.500

After features/support/hooks.rb:89 0.123

Tags: @product @uefi

1:57.897

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 15.018

And I power off the computer 0.330

And the computer is set to boot in UEFI mode 0.028

When I start Tails from USB drive "__internal" with network unplugged and I login 1:39.290

Then Tails is running from USB drive "__internal" 0.346

And the boot device has safe access rights 2.838

And Tails has started in UEFI mode 0.045

Hooks

After features/support/hooks.rb:305 0.549

After features/support/hooks.rb:89 0.039

Tags: @product

1:36.260

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.059

And I plug and mount a USB drive containing a Tails USB image 39.658

And I create a 7200 MiB disk named "usbimage" 0.035

And I plug USB drive "usbimage" 2.421

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 46.085

Hooks

After features/support/hooks.rb:305 1.741

After features/support/hooks.rb:89 0.093

Tags: @product

1:25.048

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given a computer 0.166

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:23.757

Then Tails is running from USB drive "usbimage" 0.343

And the label of the system partition on "usbimage" is "Tails" 0.198

And the system partition on "usbimage" is an EFI system partition 0.160

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.147

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.093

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.093

And the system partition on "usbimage" has the expected flags 0.087

Hooks

After features/support/hooks.rb:305 1.395

After features/support/hooks.rb:89 0.007

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:25.636	Passed

Feature Report