And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.571
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.468
And
I accept adding "cowsay" to Additional Software
3.659
And
Additional Software is correctly configured for package "cowsay"
0.626
And
I shutdown Tails and wait for the computer to power off
3.996
And
I start Tails from USB drive "__internal" with network unplugged
36.081
And
I enable persistence
5.589
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
8.995
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.199
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.018
And
available upgrades have been checked
1.084
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.996
And
I can open the Additional Software configuration window from the notification
2.547
And
I shutdown Tails and wait for the computer to power off
18.417
And
I start Tails from USB drive "__internal" with network unplugged
35.593
And
I enable persistence
6.357
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
9.695
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.232
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050