And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.028
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.501
And
I accept adding "cowsay" to Additional Software
5.120
And
Additional Software is correctly configured for package "cowsay"
0.677
And
I shutdown Tails and wait for the computer to power off
8.150
And
I start Tails from USB drive "__internal" with network unplugged
39.622
And
I enable persistence
7.287
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.103
And
I log in to a new session
12.866
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.232
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.043
And
available upgrades have been checked
2.167
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.553
And
I can open the Additional Software configuration window from the notification
3.315
And
I shutdown Tails and wait for the computer to power off
18.232
And
I start Tails from USB drive "__internal" with network unplugged
40.223
And
I enable persistence
8.630
And
I configure APT to prefer an old version of cowsay
0.008
And
I log in to a new session
11.890
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.279
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051