Project Number Date
test_Tails_ISO_stop-using-boum-org-addresses-with-autoreply 1 05 May 2026, 11:44

Feature Report

Steps Scenarios Features
Feature Passed Failed Skipped Pending Undefined Total Passed Failed Total Duration Status
Installing Tails to a USB drive 75 0 0 0 0 75 10 0 10 15:47.226 Passed
Tags: @product
Feature Installing Tails to a USB drive
As a Tails user I want to install Tails to a suitable USB drive
Tags: @product @not_release_blocker
22.311
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.002
Given I have started Tails from DVD without network and logged in 7.049
And I temporarily create a 4 GiB disk named "gptfat" 0.023
And I create a gpt partition with a vfat filesystem on disk "gptfat" 3.459
And I plug USB drive "gptfat" 2.340
When I start Tails Installer 9.403
Then I am told by Tails Installer that the destination device "is too small" 0.035
After features/support/hooks.rb:331 1.032
After features/support/hooks.rb:100 0.001
Tags: @product
18.281
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Given I have started Tails from DVD without network and logged in 7.066
And I temporarily create a 7200 MiB disk named "temp" 0.032
And I start Tails Installer 8.691
But a suitable USB device is not found 0.013
When I plug USB drive "temp" 2.268
Then the "temp" USB drive is selected 0.051
When I unplug USB drive "temp" 0.139
Then a suitable USB device is not found 0.017
After features/support/hooks.rb:331 1.277
After features/support/hooks.rb:100 0.000
Tags: @product
2:11.277
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Given I have started Tails from DVD without network and logged in 7.285
And I temporarily create a 7200 MiB disk named "install" 0.012
And I create a gpt partition with a vfat filesystem on disk "install" 3.244
And I plug USB drive "install" 2.286
And I install Tails to USB drive "install" by cloning 1:38.857
Then the running Tails is installed on USB drive "install" 16.832
And there is a random seed on USB drive "install" 2.699
But there is no persistence partition on USB drive "install" 0.058
After features/support/hooks.rb:331 1.042
After features/support/hooks.rb:100 0.123
Tags: @product
2:8.593
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.002
Given I have started Tails from DVD without network and logged in 6.829
And I temporarily create a 7200 MiB disk named "install" 0.048
And I plug USB drive "install" 2.354
And I install Tails to USB drive "install" by cloning 1:40.186
Then the running Tails is installed on USB drive "install" 15.634
And there is a random seed on USB drive "install" 3.483
But there is no persistence partition on USB drive "install" 0.055
After features/support/hooks.rb:331 1.099
After features/support/hooks.rb:100 0.129
Tags: @product
2:40.667
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.001
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 8.859
And I create a file in the Persistent directory 0.065
And I temporarily create a 7200 MiB disk named "install" 0.012
And I create a gpt partition with a vfat filesystem on disk "install" 2.892
And I plug USB drive "install" 2.295
And I install Tails with Persistent Storage to USB drive "install" by cloning 2:1.170
Then the running Tails is installed on USB drive "install" 18.925
And there is a random seed on USB drive "install" 2.706
And there is a persistence partition on USB drive "install" 0.065
And the USB drive "install" contains the same files as my persistent storage 3.673
After features/support/hooks.rb:331 0.899
After features/support/hooks.rb:100 0.241
Tags: @product
2:25.386
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.002
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 7.894
And I temporarily create a 7200 MiB disk named "install" 0.012
And I plug USB drive "install" 2.275
And I install Tails to USB drive "install" by cloning 1:53.925
Then the running Tails is installed on USB drive "install" 18.415
And there is a random seed on USB drive "install" 2.800
And there is no persistence partition on USB drive "install" 0.061
After features/support/hooks.rb:331 0.971
After features/support/hooks.rb:100 0.116
Tags: @product
2:17.077
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.002
# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.
# This first part is done without Tails Installer (install from Tails USB image)
# Note: the "__internal" disk will keep its state across scenarios
# and features until one of its snapshots is restored.
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 7.456
And I have started Tails from DVD without network and logged in 7.575
And I clone USB drive "__internal" to a temporary USB drive "install" 1.290
And I plug USB drive "install" 2.466
# This second part is done with Tails Installer, that's what this scenario is about
When I reinstall Tails to USB drive "install" by cloning 1:39.070
Then the running Tails is installed on USB drive "install" 16.375
And there is a random seed on USB drive "install" 2.789
And there is no persistence partition on USB drive "install" 0.052
After features/support/hooks.rb:331 1.051
After features/support/hooks.rb:100 0.138
Tags: @product @uefi
1:21.333
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 8.853
And I power off the computer 0.282
And the computer is set to boot in UEFI mode 0.030
When I start Tails from USB drive "__internal" with network unplugged and I login 1:8.658
Then Tails is running from USB drive "__internal" 0.320
And the boot device has safe access rights 3.148
And Tails has started in UEFI mode 0.040
After features/support/hooks.rb:331 0.901
After features/support/hooks.rb:100 0.005
Tags: @product
55.301
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.001
Given I have started Tails from DVD without network and logged in 6.648
And I plug and mount a USB drive containing a Tails USB image 23.240
And I create a 7200 MiB disk named "usbimage" 0.009
And I plug USB drive "usbimage" 2.260
And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 23.142
After features/support/hooks.rb:331 1.647
After features/support/hooks.rb:100 0.142
Tags: @product
1:6.994
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.002
Given a computer 0.052
And I start Tails from USB drive "usbimage" with network unplugged and I login 1:5.891
Then Tails is running from USB drive "usbimage" 0.281
And the label of the system partition on "usbimage" is "Tails" 0.308
And the system partition on "usbimage" is an EFI system partition 0.175
And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.110
And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.052
And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.061
And the system partition on "usbimage" has the expected flags 0.060
After features/support/hooks.rb:331 0.902
After features/support/hooks.rb:100 0.010