And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:24.560
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
28.914
And
I accept adding "cowsay" to Additional Software
4.180
And
Additional Software is correctly configured for package "cowsay"
0.903
And
I shutdown Tails and wait for the computer to power off
4.474
And
I start Tails from USB drive "__internal" with network unplugged
1:0.429
And
I enable persistence
13.105
And
I configure APT to prefer an old version of cowsay
0.040
And
I disable the tails-virt-notify-user.service user unit
0.107
And
I log in to a new session
38.301
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.128
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.078
And
the network is plugged
0.077
And
available upgrades have been checked
1.261
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.372
And
I can open the Additional Software configuration window from the notification
3.183
And
I shutdown Tails and wait for the computer to power off
2:3.867
And
I start Tails from USB drive "__internal" with network unplugged
59.271
And
I enable persistence
13.353
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
39.807
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.561
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
the network is plugged
0.113
Then
the Additional Software upgrade service has started
0.207
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.099