And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:31.262
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.710
And
I accept adding "cowsay" to Additional Software
3.436
And
Additional Software is correctly configured for package "cowsay"
0.912
And
I shutdown Tails and wait for the computer to power off
4.393
And
I start Tails from USB drive "__internal" with network unplugged
59.321
And
I enable persistence
14.145
And
I configure APT to prefer an old version of cowsay
0.031
And
I disable the tails-virt-notify-user.service user unit
0.099
And
I log in to a new session
36.105
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.283
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.103
And
available upgrades have been checked
0.085
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
7.223
And
I can open the Additional Software configuration window from the notification
3.007
And
I shutdown Tails and wait for the computer to power off
13.675
And
I start Tails from USB drive "__internal" with network unplugged
59.512
And
I enable persistence
10.924
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
38.525
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.581
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.086
Then
the Additional Software upgrade service has started
0.216
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.132