And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.956
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.464
And
I accept adding "cowsay" to Additional Software
4.902
And
Additional Software is correctly configured for package "cowsay"
0.674
And
I shutdown Tails and wait for the computer to power off
4.190
And
I start Tails from USB drive "__internal" with network unplugged
34.533
And
I enable persistence
12.063
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
7.880
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.261
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.041
And
available upgrades have been checked
0.038
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.943
And
I can open the Additional Software configuration window from the notification
2.486
And
I shutdown Tails and wait for the computer to power off
18.032
And
I start Tails from USB drive "__internal" with network unplugged
34.039
And
I enable persistence
13.293
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
8.639
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.163
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079