And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.625
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.076
And
I accept adding "cowsay" to Additional Software
5.229
And
Additional Software is correctly configured for package "cowsay"
1.055
And
I shutdown Tails and wait for the computer to power off
6.372
And
I start Tails from USB drive "__internal" with network unplugged
58.718
And
I enable persistence
13.010
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.082
And
I log in to a new session
37.946
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.511
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.071
And
available upgrades have been checked
1.158
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.223
And
I can open the Additional Software configuration window from the notification
3.185
And
I shutdown Tails and wait for the computer to power off
2:6.592
And
I start Tails from USB drive "__internal" with network unplugged
58.832
And
I enable persistence
12.868
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
36.501
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.062
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.062
Then
the Additional Software upgrade service has started
0.199
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098