And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.422
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.842
And
I accept adding "cowsay" to Additional Software
5.479
And
Additional Software is correctly configured for package "cowsay"
0.850
And
I shutdown Tails and wait for the computer to power off
4.628
And
I start Tails from USB drive "__internal" with network unplugged
57.599
And
I enable persistence
11.029
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.091
And
I log in to a new session
38.529
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.551
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.075
And
available upgrades have been checked
0.096
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.117
And
I can open the Additional Software configuration window from the notification
4.329
And
I shutdown Tails and wait for the computer to power off
13.456
And
I start Tails from USB drive "__internal" with network unplugged
1:4.636
And
I enable persistence
11.982
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
38.440
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.623
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.077
Then
the Additional Software upgrade service has started
0.168
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.099