And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:27.259
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.770
And
I accept adding "cowsay" to Additional Software
6.273
And
Additional Software is correctly configured for package "cowsay"
1.215
And
I shutdown Tails and wait for the computer to power off
6.465
And
I start Tails from USB drive "__internal" with network unplugged
1:0.520
And
I enable persistence
12.017
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.083
And
I log in to a new session
45.703
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.985
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.067
And
available upgrades have been checked
0.057
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.242
And
I can open the Additional Software configuration window from the notification
3.151
And
I shutdown Tails and wait for the computer to power off
12.636
And
I start Tails from USB drive "__internal" with network unplugged
1:0.773
And
I enable persistence
14.122
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
39.756
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.059
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.076
And
the network is plugged
0.067
Then
the Additional Software upgrade service has started
0.173
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092