And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.577
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.797
And
I accept adding "cowsay" to Additional Software
3.660
And
Additional Software is correctly configured for package "cowsay"
0.585
And
I shutdown Tails and wait for the computer to power off
7.946
And
I start Tails from USB drive "__internal" with network unplugged
35.604
And
I enable persistence
9.160
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
9.921
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.168
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.013
And
available upgrades have been checked
2.176
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.029
And
I can open the Additional Software configuration window from the notification
2.493
And
I shutdown Tails and wait for the computer to power off
17.169
And
I start Tails from USB drive "__internal" with network unplugged
36.001
And
I enable persistence
9.678
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.753
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.228
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.064
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056