And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.246
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.042
And
I accept adding "cowsay" to Additional Software
3.971
And
Additional Software is correctly configured for package "cowsay"
0.470
And
I shutdown Tails and wait for the computer to power off
2.564
And
I start Tails from USB drive "__internal" with network unplugged
31.824
And
I enable persistence
10.418
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
6.602
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.184
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.034
And
available upgrades have been checked
2.168
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.545
And
I can open the Additional Software configuration window from the notification
2.587
And
I shutdown Tails and wait for the computer to power off
18.756
And
I start Tails from USB drive "__internal" with network unplugged
31.515
And
I enable persistence
10.522
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.901
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.179
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.028
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065