And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.343
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.394
And
I accept adding "cowsay" to Additional Software
4.915
And
Additional Software is correctly configured for package "cowsay"
0.474
And
I shutdown Tails and wait for the computer to power off
2.532
And
I start Tails from USB drive "__internal" with network unplugged
32.326
And
I enable persistence
10.656
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.039
And
I log in to a new session
7.653
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.157
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.040
And
available upgrades have been checked
1.095
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.803
And
I can open the Additional Software configuration window from the notification
2.472
And
I shutdown Tails and wait for the computer to power off
12.813
And
I start Tails from USB drive "__internal" with network unplugged
33.469
And
I enable persistence
11.322
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.482
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.171
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.069