And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.904
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.406
And
I accept adding "cowsay" to Additional Software
4.008
And
Additional Software is correctly configured for package "cowsay"
0.586
And
I shutdown Tails and wait for the computer to power off
3.982
And
I start Tails from USB drive "__internal" with network unplugged
32.006
And
I enable persistence
10.827
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
7.653
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.147
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.025
And
available upgrades have been checked
0.036
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.319
And
I can open the Additional Software configuration window from the notification
2.611
And
I shutdown Tails and wait for the computer to power off
12.734
And
I start Tails from USB drive "__internal" with network unplugged
32.609
And
I enable persistence
10.456
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
8.805
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.160
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.030
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052